How Long Does 3D Printing Take? An In-Depth Guide

69

This article explores the variables that affect 3D printing times, offering helpful advice for streamlining processes and increasing output.

Introduction

3D printing, also known as additive manufacturing, constructs items by adding layers based on digital models.

A comprehensive guide of print times enables you to strategically plan, optimize resources, and effectively rectify in order to achieve a successful 3D printing endeavor.

Factors Influencing 3D Printing Time

Complexity of the Design

Intricacy of Details

Highly detailed objects with sharp corners, curves, and thin features require more print passes and potentially slower speeds to maintain accuracy. This significantly increases printing time.

Level of Structural Support Required

Complex designs often need support structures to prevent overhanging features from drooping or collapsing during printing. Generating and removing these supports adds to the overall printing time.

Printing Technology and Method

The type of 3D printer you use has a major impact on printing speed.

FDM (Fused Deposition Modeling)

This popular method works by extruding molten filament layer by layer. FDM printers can be fast for simpler objects, but intricate designs or high-resolution prints take longer.

SLA (Stereolithography)

SLA printers use a laser to cure liquid resin layer by layer. They offer high resolution and accuracy but can be slower than FDM due to the layer-by-layer curing process.

SLS (Selective Laser Sintering)

SLS printers use a laser to sinter powder particles together, creating a solid object.

While good for complex geometries, SLS printing can be relatively slow due to preheating and post-processing steps.

Layer Height and Resolution

Impact on Print Quality

Layer height refers to the thickness of each layer deposited during printing.

Lower layer heights create smoother surfaces and finer details but require more layers, leading to longer printing times.

Relationship With Printing Time

There’s a trade-off between print quality and speed. Higher layer heights print faster but result in a stepped or “staircase” effect on curved surfaces.

Reducing layer height improves detail but comes at the cost of increased printing time.

Material Type and Properties

Thermoplastics, Resins, Metals, etc.

Different materials have varying melting points, viscosities (resistance to flow), and cooling requirements.

These properties affect how quickly the material can be deposited and solidified, impacting printing speed.

Melting Points and Cooling Requirements

Materials with higher melting points require more energy to reach a printable state, potentially slowing down the printing process.

Similarly, materials that take longer to cool may necessitate slower printing speeds to ensure proper layer adhesion.

3D Printing Time Estimates

General Guidelines for Common Prints

Small Figurines or Prototypes (1-4 hours)

Simpler designs with minimal overhangs and medium resolution can print relatively quickly on FDM printers. SLA and SLS might be even faster for basic prototypes due to their inherent accuracy.

Medium-sized Objects (4-12 hours)

Objects with moderate complexity and detail can take several hours to print. Printing time increases with infill density, layer height, and overall size.

Large-scale Models or Parts (12+ hours)

Large and intricate designs with high infill will take significantly longer. Depending on the printer and settings, these prints can take over a day or even multiple days to complete.

Online Calculators and Tools

Utilizing Available Resources

• Slicer Software: Most 3D slicer software (used to prepare models for printing) have built-in time estimation features. After slicing your model, the software analyzes factors like layer height, infill density, and printing speed to provide an estimated print time. This estimate is usually a good starting point since it considers your specific model and printer settings.
• Online Print Time Calculators: There are online calculators available that allow you to input parameters like model size, layer height, infill density, and printing speed. These tools can provide a rough estimate based on averages for specific printing technologies.

Here’s a good approach for estimating print time:

1. Use your slicer software’s built-in time estimation tool. This offers the most accurate estimate for your specific setup.
2. If you don’t have slicer software yet, consider using online calculators.
3. Look for online communities and forums related to 3D printing. You can find discussions with print times for similar models, which can be helpful for comparison.

Input Parameters for Accurate Estimates

• Model complexity: The more intricate the design, the longer it will take to print.
• Layer height: Lower layer heights create smoother surfaces but require more layers, increasing printing time.
• Infill density: Higher infill density creates a stronger object but takes longer to print.
• Printing speed: Faster printing speeds reduce print time, but quality might be compromised.
• Material type: Different materials have varying printing speeds due to factors like melting point and cooling requirements.General Guidelines For Common Prints

3D Print Applications

Miniature Models

The application of 3D printing technology is thriving in the creation of intricate miniature environments and practical objects. In the field of architecture, 3D printing enables meticulous construction planning through the creation of exceedingly precise scale models.

On the other hand, this same technology makes it possible to produce personalized figures that are remarkably accurate.

Functional Prototypes

3D printing revolutionizes the design and engineering workflow by enabling rapid prototyping. This translates to the swift creation of physical models, allowing designers and engineers to quickly test, iterate, and refine their ideas.

The significant reduction in time to obtain a physical prototype, compared to traditional methods, translates to shorter development cycles and faster innovation.

Industrial Components

In the industrial sector, 3D printing is used to produce functional, physical components.

This encompasses tailored jigs and fixtures that optimize assembly processes, intricate and vital components for medical or aerospace apparatus, and even the ability to produce parts on demand, thereby diminishing dependence on conventional manufacturing and convoluted supply chains.

Optimizing 3D Printing Time

Batch Printing

Consolidate multiple prints into a single batch whenever possible to reduce idle time and maximize overall printing time.

Strategically arrange objects on the print bed to fill as much space as possible without compromising printability, maximizing the utilization of your printer’s build volume.

Material and Technology Selection

Choose a material that best suits the application of your print, considering factors like strength, flexibility, durability, and heat resistance to ensure functionality and longevity.

Understand the strengths and weaknesses of different 3D printing technologies (e.g., FDM for prototypes, SLA for intricate miniatures) to select the one that best suits your project needs.

Print Settings Adjustment

Find the optimal balance between speed and quality depending on your project. Prioritize quality with slower speeds for high-detail models, and adjust settings for acceptable quality at a faster pace for quicker prototype turnaround times.

Experiment with various print settings like layer height, infill density, and printing temperature using your slicer software. Reducing infill density can shorten printing time while maintaining structural integrity for non-critical parts.

Conclusion

This article examined the main elements that impact print time, ranging from material selection to design complexity.

Additionally, we offered advice on how to choose materials, print in batches, adjust settings, and maximize efficiency.

Power Your 3D Printing with Unionfab

Unionfab offers a wide range of materials and expert guidance to empower you throughout your project.

We can seamlessly integrate your chosen material, whether it’s for high-volume production using sturdy metals for CNC machining or rapid prototyping with flexible resins for 3D printing. Our extensive material selection allows you to choose the best option for each stage of your project.